░ ░ ░
░ ▄▄▀▀▀▓▒ ░▒▓▀ ■▄▄ ░ + + ░ M A G ▒ N i ░ T U D E + + ░
░ ░░▒▒ ▐▓ ▓▒ ░▓▀░░ ░ ▄▄▄▓▄▄▄▄ ░░ ░░
▒ ░░░▓▒░░ ░▓▌ ▐▒░ ▒▌ ░░ ░ ▒░ ▄▓▀▀ ░▓░ ░░ ▄▄ ░ ▒░▒
▓▄ ▀█▄░░ ░░▓■■■■▓░ ░▓ ░▒░ ▒░ ▓▒▄▀ ▒ ▒ ░░▒ ▀▒░ ░ ░░▒▓▓
▀▄▓▄ ▀▓▓▄▄■ ░ ▀▀▓▒░ ░▓░ ▓▓▌ ░ ▄ ░░▓▌ ░░░ ░ ░░▒▒▓▓█
▀▄▓▄ ▄▓▀ ▄▒▓▓▓▓▀▀▀ ■■ ▄ ▒▒░ ▀▀▓▓▒ ▓▓▌ ▄▓ ░▒▓█ ▒░░░░░░░▒▒▒▒▒▓▌
▓▄ ▀██▓▀▒░▄█▓░▓██▓ ▄▒▓▒▄▄ ▄▓ ▓█▌▄▒▒▓▄ ▐█▌ ░▒▓█▄▄ ▀▓▒▒▒▓▓▓▓▓▓▓▀
▐▓▓▄ ▀ ░▓█▓▌ ▐███▓▓▄▄ ▄▓▓▓▀░ ▐██▄ ▀ ▓██▀▓▓▓▀ ▓█▌ ░░▒▓▀▀▓▓▄▄ ▀▀▀▀▀▀▀
▐▓███▄ ░▓███ ███▓▐██▓▀▓▓█▀ ░▒░ ▓▓██▄ ███▓▄▄███████▓▓▀ ░░▒░ ▀███▄ ▐▓▓██▓▒░░
▐██▓▀▓▓▄██▓██ ▐██▓░▐██▌▐██▌ ▓▓▒ ▓█▓ ▀▓███▒██▄░▓██▓▄█▌ ▄▄░▒▓▒ ▐▓██▌ ▀▓█▌
▐██▓ ▀▓▀ ▓▓█ ██▓▒ ▐██▓▓█▓ █▓▓ ██▓▌ ▐███░██▓ ▒████▓ ▐██░▓▓▌ ░███▓▄▄▄██▄
▐██▓ ▓▓▓▒▓▓▓▀▀▓▓█▓▓█▓ ██▓ ██▓▌ ███ ██▓ ░████▓ ▓█▌▐▓▓ ▐███▌███▀ ░
▐██▓ ▐▓▒▓▓▓▀▒ ▄▓██▓▐█▓▌ ██▓ ██▓▌ ▓██▌██▓ ░██▐▓▓▌ ▐▓▓███▌ ░▓███████ ░░
▐██▓ ▄▓▒▒▓▒▀ ░ ▀▓▓▄▀██▄▄██▓▄█▓▓▀ ▒▓██▓▓▒ ▒█▓ ▀▓▓▄▄▓▓▓▓█▓ ▄▓███▀▓███▌ ░▒
▐██▓░ ▀▀▀░▒▒ ▀▀▀ ▀▀▓▓█▌▀▀▒ ░▓▓▓▒▓░ ▓▓▀ ░ ▀▀▀▀░▒▓▄▓▓▀▀ ▀▀▓▓██ ░░▓
▐█▓▓▒░ ░░ ░ ▄▄▄█████▄▄▄▄ ▀▓█▌ ░ ░▒░ ▒░▄▀ ▄▓▄ ▄▓▓▀▀ ▀▓▓▒░░▒▓
▐▓▓▒▒▒░ ▄▓██▓▓▓▀▀▀▀▀▀▀▀▓█▄██ ░░▒▒░ ▀ ▄▀▒░ ░ ▒▒░▒▒▓
▐▓▒▒▒░ ░ ░░▒▓▓█▀ ▀▀▓▄ ░▒▒▓▓▒░░ ░ ░▓▌ ░ ▒ ░░▒▓▓
▐▒▒░ ▓▓ ++S! ++b5! ++Ix ▄▀■▄░▒▒▓▓▓█▀ ░▒▓ ░ ░░▒░▒▓▒░▒░░░ ░▒▒▓█
▐▒░ ░░ ▀▄ ▐▌ ▀▀▀▀▒ ░▒▒ ▒ ░▒▓▓█▌
▒░ ░▒░ ▀ ▄ ▄▀ ░ ░░ ░ ░ ▄▒▓██▀
░ ░▒▓▒░ ░ ▀ ■■ ▀ ░ ░░▓▓▓▓▀ ▒
▒ ▀ ▀▓▌ ░ ░░▒░░▒▒▒▀ ▄▓
░ FORGE V2008 █▓▓
░ (c) TRANSVALOR █▓▓
░ ▀ ▓▒
░ SUPPLIER...: Team MAGNITUDE 2008 DATE......: 14/10/2008 ▒░
░ ░░
▒ CRACKER....: Team MAGNITUDE 2008 SIZE......: 1 DISK ░▒
▒ ▒
▓░ PACKAGER...: Team MAGNITUDE 2008 PROTECTION: License ░▓
▓▒░ ▒▒▓
█▀▓▄▄ ▄▀▀▄ ▄▀▀▄ █ ▄▀▀▄ ▄▀▀▄ ▄▀▀ ▄▀▀▄ ▀ █▀▀▄ ▄▀▀ ▄▀▀▄ ▄▄▓▀█
▀▀▀▀▀▀▀ ▀▀▀ ▓▀▀▄ ▓▀▀▀ ▓▄ ▓▀▀▀ ▓▀▀█ ▀▀▀▓ ▓▀▀▀ ▀▀▀ ▓ ▓ █ ▓▀▀▀ ▓▄▄▀ ▀▀▀ ▀▀▀▀▀▀▀
█▓▀▀ ▀ ▀ ▀ ▀ ▀ ▀ ▀ ▀ ▀ ▀▀▓█
▓ ░ ░░░░ ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ ░░░░ ░ ▓
▒ ▒
░ ░
░ FORGE is dedicated to the simulation of hot, warm and cold forging of ░
░ both 3D parts (* steering knuckles, crankshafts, * twin connection ░
░ rods, lower arms, *constant velocity joints, bevel gears,* aircraft ░
░ landing gears, fan blades, engine mountings, and wing components ) and ░
░ 2D geometry parts ( axisymmetric (revolution) parts and parts with ░
░ high length-to-width ratios such as: ░
░ * cylinders, impacts, extrusions, axles, shafts, gear blanks, rings, ░
░ fasteners and wire drawing,* aircraft disks, blades and wheels, * ░
░ bearing cages, railway wheels ) ░
░ Using the software with different process settings and/or different ░
░ die designs, the user can optimize part production at low cost, ░
░ compared to usual trial-and-error testing. FORGE is used for rational ░
░ decision-making and ultimately, leads to production cost reduction. ░
░ ░
░ http://www.transvalor.com/forge_gb.php ░
░ ░
░ ░
░░ ░░
▒░ ░▒
▓▒░ ░▒▓
█▓▓▒▄▄ ▄▄▒▓▓█
▄▄▄▄▄▄▄ ▄▄▄▄▄▄ ▀ █▀▀▄ ▄▀▀ ▓▀▀▄ ▄▀▀▄ █ ▓ ▀ █▀▀▄ ▄▀▀ ▄▀▀▄ ▄▄▄▄▄▄ ▄▄▄▄▄▄▄
█▄▓▀▀ ▓ ▓ █ ▀▀▀▓ ▓ ▓▀▀█ ▀▄▄ ▀▄▄ ▓ ▓ █ ▓▀▀▀ ▓▄▄▀ ▀▀▓▄█
▓▒░ ▀ ░▒▓
▓░ ░ ░░░░ ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ ░░░░ ░ ░▓
▒ ▒
▒ 1) unRAR and burn ░
▒ 2) check ".txt" from "\MAGNiTUDE" dir ░
▒ 3) enjoy another fine MAGNiTUDE-release! ░
▒ ░
▒ ░
▒ ░
░ ░
░ █▀▀▄ ▄▀▀▄ ▓▀▀▄ ▄▀▀▄ ▄▀▀ ░
░ ░ ░░░░░ ░░░░░░░░░░░░░░▒▒▒▓ █ ▓▄▄▀ ▓ ▓▀▀▀ ▀▀▀▓▒▒▒░░░░░░░░░░░░░ ░░░░░ ░ ░
░ ░
░ Magnitude, a measure of the brightness of a star - the Ancient Greek ░
░ astronomers divided the stars into six magnitudes. First-magnitude ░
░ stars were the brightest, and sixth-magnitude stars were the ░
░ faintest. This system has been kept in modern times, when the new era ░
░ of MAGNiTUDE has started. ░
░ ░
░ If you feel like you have the power to face first-magnitude stars ░
░ contact us at: ░
░ team.magnitude@gmail.com ░
░ ░
░ ░ ░
▒ ░▒▓▓█▓░░ ░ ▒
░ ▄▄███ ▐▓▓██▌ ░
▒ ▐█████▌ ▓████▄ ░▒
▓░ ▓▓████▄ ▐▓█████▄▄ ░▒▓
▓▒▒ ▓████████▄▄███▀███████▄▄▄ ░░▒▓▓
█▓▒░ █████ ▀▀████▓▓ ▀▀▀▓▓▓███████████▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▓▓▓▓▓▀
▄▄▄▄ ████▓ ▓▄▄▄ ▀▀▀ ▓▓▓▄▄▄▄ ▀▀▀▀▀▀▓▓▓▓▓▓▓▓▓▓▓▓▓▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ ▄
███▓▓
░ ░░ █▓▓▓▒ Ascii by the Dynamic Trio: S!, b5! and Ix - (c) SAC 2005 ░░░░░░░░░ ░
▓▓▒▒░
▒▒▒░
░░ ░